Ok so I can get this to work somewhat. I can do
/console send mule /ma cure main
and it works fine. along with haste regen refesh etc etc.
But if Try say
/console send mule /ma cure ii main
No go I've tried
/console send mule /ma "Cure II" main
/console send mule /ma "Cure_II" main
/console send mule /ma Cure II main
/console send mule /ma "CureII" main
and a bunch of other combos. No go any spell or ability that has more than 1 word I can't get to work.
Windower 4 Send Addon Help
Windower 4 Send addon Help
Try with "" around the /ma line like this:
/console send mule "/ma "Cure IV" main"
/console send mule "/ma "Cure IV" main"
Just tried it no go on that either.
Have you tried with just: /console send mule /ma cure4 main
That's spellcast syntax. You can put a number in without spaces. I'd imagine if you're using windower4 you could at least load spellcast. Maybe that'll work for now.
That's spellcast syntax. You can put a number in without spaces. I'd imagine if you're using windower4 you could at least load spellcast. Maybe that'll work for now.
[+]
/console send mule //cure4 main
nearly certain this requires spellcast to be loaded
nearly certain this requires spellcast to be loaded
Woot go go Spellcast That did the trick Thank you very much kinda sir.
got a quick question about spellcast tho what would the command be for like valor minuet
got a quick question about spellcast tho what would the command be for like valor minuet
/console send mule //valorminuet4 would work
Thanks for the tips guys running silk tread smooth now! XD
/echo All this work just to play with myself!
/echo All this work just to play with myself!
high jacking thread
anyone know how to move the position of timers?
anyone know how to move the position of timers?
Yeah go to where you have your windower installed prolly programfiles(x86)/windower/plugins
then open the sttings folder and then right click on timers.xml open with notepad or wordpad(preferred) then find the line that says
<recastx>#</recastx>
<recasty>#<recasty>
x # is up and down y # is left to right
so just change and save unload and reload plugin till its in a good spot for you.
then open the sttings folder and then right click on timers.xml open with notepad or wordpad(preferred) then find the line that says
<recastx>#</recastx>
<recasty>#<recasty>
x # is up and down y # is left to right
so just change and save unload and reload plugin till its in a good spot for you.
Is it possible to do something with <t> ? like : /console send mule /ma cure4 <t>
Gilgamesh.Bassai said: »
Is it possible to do something with <t> ? like : /console send mule /ma cure4 <t>
<t> will process as if you typed it on your mule's <t>, so it'll hit whatever your mule is targeting. You can kind of work around this using spellcast and a trigger spell, but you'd need to do it for every spell you want converted. There's a post somewhere on the windower forums on how to set it up, although I'm really hoping they can update send to support parsing <t> and having it work for mobs.
I have a few aliases I use with send to make dual boxing easier:
Hope this helps.
Necro Bump Detected!
[224 days between previous and next post]
Im trying to find a way too 1 cast spells on a mob and 2 attack a mob
is there a way to do that?I tryed send but its not working but maybe Im doing it wrong pls help
is there a way to do that?I tryed send but its not working but maybe Im doing it wrong pls help
You cannot specify a mob exactly, but you can either use <bt> or /assist, followed by a short wait and then the command, depending on what you're trying to do. What exactly are you trying that doesn't work?
Im trying to be on sch and get my mnk mule to attack a mob. Tryed /console send mulesname /assist "boneslasher" but it did not work. and trying to get set up for dboxing stuners in delve
Assisting only works if your main is engaged. Is that the case? If not, you might need the <bt> method, although that only works reliably in a single party. You can use it if you time it right after a spell of yours lands.
I have try attacking the mob than using /assist nothing but ill have to try <bt>. <bt> works for spells so one down. Ill try more tomorrow. Oh and ty for helping
Old question in the OP but in case anyone is still wondering, you can't use double quotes inside send. /consolse send mule /ma 'Cure II' name would be the proper format.
Necro Bump Detected!
[621 days between previous and next post]
anyone able to get this to work for a mule follow main command?
/console send MuleName /follow MainName should work, I had commands like this bound to go to all characters for when I had 4-6 going at once.
yeah thats what I need thanks man
Bismarck.Inference said: »
/console send MuleName /follow MainName should work, I had commands like this bound to go to all characters for when I had 4-6 going at once.
ok not working for some reason imma relog all chars and redownload see if that does the trick
Ok my main will follow my mule, but my mule wont follow my main ; ;
the disrespect
the disrespect
Blittzjr, make sure your alts account has the Send Addon turned on. I just tried this on my alt and worked fine.
As to other commands, use ' instead of "
example: /console send mulename /ja 'Spectral Jig' <me>
As to other commands, use ' instead of "
example: /console send mulename /ja 'Spectral Jig' <me>
Did the little mini-update the other night break this? Until last night it had been a good year since the last time I tried this addon but no matter how I type in my macro I can not get this to work.
Working for anyone else right now?
Working for anyone else right now?
Bahamut.Enkidou said: »
Did the little mini-update the other night break this? Until last night it had been a good year since the last time I tried this addon but no matter how I type in my macro I can not get this to work.
Working for anyone else right now?
Working for anyone else right now?
Works fine for me. Make sure you use shortcuts on your mules and don't use any double quotes in your macros. Should look like this:
/console send mulename /ja Spectral Jig <me>
--or--
/console send mulename /ma Cure4 mainname
Edit: Shortcuts is an addon in case you weren't aware.
Fenrir.Divinian said: »
Working for anyone else right now?
Works fine for me. Make sure you use shortcuts on your mules and don't use any double quotes in your macros. Should look like this:
/console send mulename /ja Spectral Jig <me>
--or--
/console send mulename /ma Cure4 mainname
Edit: Shortcuts is an addon in case you weren't aware.
Works fine for me. Make sure you use shortcuts on your mules and don't use any double quotes in your macros. Should look like this:
/console send mulename /ja Spectral Jig <me>
--or--
/console send mulename /ma Cure4 mainname
Edit: Shortcuts is an addon in case you weren't aware.
I wasn't aware. Thanks! I'll give that a go.
About the Shortcuts addon, I see this is the list of spells included on initial download:
Are we able to add in Geo spells? If so, is it as simple as sliding them into the list of the shortcuts and/or aliases file?
Quote:
<altep>Teleport-Altep</altep>
<bl>Blink</bl>
<c1>Cure</c1>
<c2>Cure II</c2>
<c3>Cure III</c3>
<c4>Cure IV</c4>
<c5>Cure V</c5>
<c6>Cure VI</c6>
<cel>Celerity</cel>
<cw1>Curing Waltz</cw1>
<cw2>Curing Waltz II</cw2>
<cw3>Curing Waltz III</cw3>
<cw4>Curing Waltz IV</cw4>
<cw5>Curing Waltz V</cw5>
<da>Dark Arts</da>
<dem>Teleport-Dem</dem>
<ds>Divine Seal</ds>
<es>Elemental Seal</es>
<holla>Teleport-Holla</holla>
<hw>Healing Waltz</hw>
<ichi>Utsusemi: Ichi</ichi>
<jugner>Recall-Jugner</jugner>
<la>Light Arts</la>
<mea>Teleport-Mea</mea>
<meri>Recall-Meriph</meri>
<meriph>Recall-Meriph</meriph>
<ni>Utsusemi: Ni</ni>
<pash>Recall-Pashh</pash>
<pashh>Recall-Pashh</pashh>
<pen>Penury</pen>
<pro1>Protectra</pro1>
<pro2>Protectra II</pro2>
<pro3>Protectra III</pro3>
<pro4>Protectra IV</pro4>
<pro5>Protectra V</pro5>
<r1>Raise</r1>
<r2>Raise II</r2>
<r3>Raise III</r3>
<re1>Regen</re1>
<re2>Regen II</re2>
<re3>Regen III</re3>
<re4>Regen IV</re4>
<re5>Regen V</re5>
<sh1>Shellra</sh1>
<sh2>Shellra II</sh2>
<sh3>Shellra III</sh3>
<sh4>Shellra IV</sh4>
<sh5>Shellra V</sh5>
<she1>Shellra</she1>
<she2>Shellra II</she2>
<she3>Shellra III</she3>
<she4>Shellra IV</she4>
<she5>Shellra V</she5>
<ss>Stoneskin</ss>
<utsu1>Utsusemi: Ichi</utsu1>
<utsu2>Utsusemi: Ni</utsu2>
<vahzl>Teleport-Vahzl</vahzl>
<yhoat>Teleport-Yhoat</yhoat>
<bl>Blink</bl>
<c1>Cure</c1>
<c2>Cure II</c2>
<c3>Cure III</c3>
<c4>Cure IV</c4>
<c5>Cure V</c5>
<c6>Cure VI</c6>
<cel>Celerity</cel>
<cw1>Curing Waltz</cw1>
<cw2>Curing Waltz II</cw2>
<cw3>Curing Waltz III</cw3>
<cw4>Curing Waltz IV</cw4>
<cw5>Curing Waltz V</cw5>
<da>Dark Arts</da>
<dem>Teleport-Dem</dem>
<ds>Divine Seal</ds>
<es>Elemental Seal</es>
<holla>Teleport-Holla</holla>
<hw>Healing Waltz</hw>
<ichi>Utsusemi: Ichi</ichi>
<jugner>Recall-Jugner</jugner>
<la>Light Arts</la>
<mea>Teleport-Mea</mea>
<meri>Recall-Meriph</meri>
<meriph>Recall-Meriph</meriph>
<ni>Utsusemi: Ni</ni>
<pash>Recall-Pashh</pash>
<pashh>Recall-Pashh</pashh>
<pen>Penury</pen>
<pro1>Protectra</pro1>
<pro2>Protectra II</pro2>
<pro3>Protectra III</pro3>
<pro4>Protectra IV</pro4>
<pro5>Protectra V</pro5>
<r1>Raise</r1>
<r2>Raise II</r2>
<r3>Raise III</r3>
<re1>Regen</re1>
<re2>Regen II</re2>
<re3>Regen III</re3>
<re4>Regen IV</re4>
<re5>Regen V</re5>
<sh1>Shellra</sh1>
<sh2>Shellra II</sh2>
<sh3>Shellra III</sh3>
<sh4>Shellra IV</sh4>
<sh5>Shellra V</sh5>
<she1>Shellra</she1>
<she2>Shellra II</she2>
<she3>Shellra III</she3>
<she4>Shellra IV</she4>
<she5>Shellra V</she5>
<ss>Stoneskin</ss>
<utsu1>Utsusemi: Ichi</utsu1>
<utsu2>Utsusemi: Ni</utsu2>
<vahzl>Teleport-Vahzl</vahzl>
<yhoat>Teleport-Yhoat</yhoat>
Are we able to add in Geo spells? If so, is it as simple as sliding them into the list of the shortcuts and/or aliases file?
Should be, yeah.
IIRC that default list is just the automatic aliases that spellcast used to have.
Anyway, the Send addon relies on IPC. Windower's IPC implementation occasionally runs into initialization problems that either result in no communication or one directional communication. It's difficult to replicate, IPC is complicated, and thus the problem is difficult to debug. Fortunately, there's one common solution to the vast majority of IPC problems.
The solution to pretty much every problem you ever have with Send is to shut down your clients and restart them.
This causes IPC to fully re-initialize and probably fixes whatever problems you were having (unless something goes wrong again).
IIRC that default list is just the automatic aliases that spellcast used to have.
Anyway, the Send addon relies on IPC. Windower's IPC implementation occasionally runs into initialization problems that either result in no communication or one directional communication. It's difficult to replicate, IPC is complicated, and thus the problem is difficult to debug. Fortunately, there's one common solution to the vast majority of IPC problems.
The solution to pretty much every problem you ever have with Send is to shut down your clients and restart them.
This causes IPC to fully re-initialize and probably fixes whatever problems you were having (unless something goes wrong again).
All FFXI content and images © 2002-2024 SQUARE ENIX CO., LTD. FINAL
FANTASY is a registered trademark of Square Enix Co., Ltd.